Your current location： home > Sensor
HORIZONTAL SENSOR 303015 |
| Publisher: Wuxi Kuanhui Technology Co., Ltd. release time:2021-12-9 13:24:12 hit count:200 shut down |
 |
PRODUCT NAME：Horizontal sensor (self-checking dip switch)
KUANHUI P/N：303015
SYSC series self-checking dip switch is used to measure the change of biaxial dip Angle. When the dip Angle of the object under test is less than the preset alarm Angle, the dip switch outputs high voltage signal, and the voltage is equal to the power supply voltage. When the tilt Angle of the measured object is greater than the preset alarm Angle, the dip switch outputs a low voltage signal, with the voltage value approximately equal to zero volts. The zero setting button is used to set the horizontal zero reference point. SYSC series unique spring design, by pressing the spring to check whether the tilt switch is working properly, the upper cover of the horizontal bubble, also convenient for installation and debugging. 
|
中文
English